Download ready-to-print Chitubox profiles for the Asiga MAX UV (7mW/cm2) DLP 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
RESIN NAME |
0.05 MM LAYER |
0.1 MM LAYER |
SPEED |
DELAY |
|
NNBR |
Standard Blend Resin, Red |
1.9s, bottom 20s |
2.5s, bottom 20s |
100 mm/min |
1s |
|
NNBB |
Standard Blend Resin, Black |
1.9s, bottom 20s |
2.6s, bottom 30s |
100 mm/min |
1s |
|
NNBU |
Standard Blend Resin, Unp. |
1.7s, bottom 20s |
2.3s, bottom 20s |
100 mm/min |
1s |
|
NIBR |
Industrial Blend Resin, Red |
1.9s, bottom 20s |
2.5s, bottom 20s |
100 mm/min |
1s |
|
NIBB |
Industrial Blend Resin, Black |
1.9s, bottom 20s |
2.6s, bottom 30s |
100 mm/min |
1s |
|
NIBU |
Industrial Blend Resin, Unp. |
1.7s, bottom 20s |
2.3s, bottom 20s |
100 mm/min |
1s |
|
CB |
Castable Blend Resin, Red |
1.9s, bottom 20s |
2.5s, bottom 20s |
100 mm/min |
1s |
|
NSW |
Snow White Resin, White |
1.9s, bottom 20s |
2.5s, bottom 20s |
100 mm/min |
1s |
|
DB |
Deep Black Resin, Black |
2s, bottom 20s |
2.7s, bottom 30s |
100 mm/min |
1s |
|
AG |
Ash Grey Resin, Grey |
1.9s, bottom 20s |
2.5s, bottom 20s |
100 mm/min |
1s |
|
NC |
Nano Clear Resin, Clear |
2.3s, bottom 20s |
3s, bottom 30s |
100 mm/min |
1s |
|
DCH |
Dentifix-3D Casting HR Resin, Green |
1.9s, bottom 20s |
2.6s, bottom 30s |
100 mm/min |
1s |
|
DM+ |
Dentifix-3D Modelling HR+ Resin, Grey |
2.1s, bottom 20s |
2.8s, bottom 30s |
100 mm/min |
1s |
|
DMHS |
Dentifix-3D Modelling HR Resin, Sand |
2.2s, bottom 20s |
2.9s, bottom 30s |
100 mm/min |
1s |
|
DMHG |
Dentifix-3D Modelling HR Resin, Grey |
2.2s, bottom 20s |
2.9s, bottom 30s |
100 mm/min |
1s |
|
DMHC |
Dentifix-3D Modelling HR Resin, Clear |
2.3s, bottom 20s |
3.1s, bottom 30s |
100 mm/min |
1s |
|
DGP |
Dentifix-3D Gingiva Mask FLEX, Pink |
2.8s, bottom 30s |
3.8s, bottom 40s |
50 mm/min |
2s |