Download ready-to-print Chitubox profiles for the Peopoly Phenom L MSLA LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
RESIN NAME |
0.05 MM LAYER |
0.1 MM LAYER |
SPEED |
DELAY |
|
NNBR |
Standard Blend Resin, Red |
23.6s, bottom 240s |
31.9s, bottom 320s |
100 mm/min |
1s |
|
NNBB |
Standard Blend Resin, Black |
24.6s, bottom 250s |
33.3s, bottom 330s |
100 mm/min |
1s |
|
NNBU |
Standard Blend Resin, Unp. |
21.6s, bottom 220s |
29.1s, bottom 290s |
100 mm/min |
1s |
|
NIBR |
Industrial Blend Resin, Red |
23.6s, bottom 240s |
31.9s, bottom 320s |
100 mm/min |
1s |
|
NIBB |
Industrial Blend Resin, Black |
24.6s, bottom 250s |
33.3s, bottom 330s |
100 mm/min |
1s |
|
NIBU |
Industrial Blend Resin, Unp. |
21.6s, bottom 220s |
29.1s, bottom 290s |
100 mm/min |
1s |
|
CB |
Castable Blend Resin, Red |
23.6s, bottom 240s |
31.9s, bottom 320s |
100 mm/min |
1s |
|
NSW |
Snow White Resin, White |
23.6s, bottom 240s |
31.9s, bottom 320s |
100 mm/min |
1s |
|
DB |
Deep Black Resin, Black |
25.7s, bottom 260s |
34.6s, bottom 350s |
100 mm/min |
1s |
|
AG |
Ash Grey Resin, Grey |
23.6s, bottom 240s |
31.9s, bottom 320s |
100 mm/min |
1s |
|
NC |
Nano Clear Resin, Clear |
28.7s, bottom 290s |
38.8s, bottom 390s |
100 mm/min |
1s |
|
DCH |
Dentifix-3D Casting HR Resin, Green |
24.6s, bottom 250s |
33.3s, bottom 330s |
100 mm/min |
1s |
|
DM+ |
Dentifix-3D Modelling HR+ Resin, Grey |
26.7s, bottom 270s |
36s, bottom 360s |
100 mm/min |
1s |
|
DMHS |
Dentifix-3D Modelling HR Resin, Sand |
27.7s, bottom 280s |
37.4s, bottom 370s |
100 mm/min |
1s |
|
DMHG |
Dentifix-3D Modelling HR Resin, Grey |
27.7s, bottom 280s |
37.4s, bottom 370s |
100 mm/min |
1s |
|
DMHC |
Dentifix-3D Modelling HR Resin, Clear |
29.8s, bottom 300s |
40.2s, bottom 400s |
100 mm/min |
1s |
|
DGP |
Dentifix-3D Gingiva Mask FLEX, Pink |
35.9s, bottom 360s |
48.5s, bottom 480s |
50 mm/min |
2s |