Download ready-to-print Chitubox profiles for the Anet N4 LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
RESIN NAME |
0.05 MM LAYER |
0.1 MM LAYER |
SPEED |
DELAY |
|
NNBR |
Standard Blend Resin, Red |
12.4s, bottom 120s |
16.7s, bottom 170s |
100 mm/min |
1s |
|
NNBB |
Standard Blend Resin, Black |
12.9s, bottom 130s |
17.5s, bottom 170s |
100 mm/min |
1s |
|
NNBU |
Standard Blend Resin, Unp. |
11.3s, bottom 110s |
15.3s, bottom 150s |
100 mm/min |
1s |
|
NIBR |
Industrial Blend Resin, Red |
12.4s, bottom 120s |
16.7s, bottom 170s |
100 mm/min |
1s |
|
NIBB |
Industrial Blend Resin, Black |
12.9s, bottom 130s |
17.5s, bottom 170s |
100 mm/min |
1s |
|
NIBU |
Industrial Blend Resin, Unp. |
11.3s, bottom 110s |
15.3s, bottom 150s |
100 mm/min |
1s |
|
CB |
Castable Blend Resin, Red |
12.4s, bottom 120s |
16.7s, bottom 170s |
100 mm/min |
1s |
|
NSW |
Snow White Resin, White |
12.4s, bottom 120s |
16.7s, bottom 170s |
100 mm/min |
1s |
|
DB |
Deep Black Resin, Black |
13.5s, bottom 130s |
18.2s, bottom 180s |
100 mm/min |
1s |
|
AG |
Ash Grey Resin, Grey |
12.4s, bottom 120s |
16.7s, bottom 170s |
100 mm/min |
1s |
|
NC |
Nano Clear Resin, Clear |
15.1s, bottom 150s |
20.4s, bottom 200s |
100 mm/min |
1s |
|
DCH |
Dentifix-3D Casting HR Resin, Green |
12.9s, bottom 130s |
17.5s, bottom 170s |
100 mm/min |
1s |
|
DM+ |
Dentifix-3D Modelling HR+ Resin, Grey |
14s, bottom 140s |
18.9s, bottom 190s |
100 mm/min |
1s |
|
DMHS |
Dentifix-3D Modelling HR Resin, Sand |
14.6s, bottom 150s |
19.6s, bottom 200s |
100 mm/min |
1s |
|
DMHG |
Dentifix-3D Modelling HR Resin, Grey |
14.6s, bottom 150s |
19.6s, bottom 200s |
100 mm/min |
1s |
|
DMHC |
Dentifix-3D Modelling HR Resin, Clear |
15.6s, bottom 160s |
21.1s, bottom 210s |
100 mm/min |
1s |
|
DGP |
Dentifix-3D Gingiva Mask FLEX, Pink |
18.9s, bottom 190s |
25.4s, bottom 250s |
50 mm/min |
2s |